Cat 6 RJ45 550MHz STP Shielded Network Cable 1 Foot
Cat 6 Molded Shielded Patch Cable.Category 6 high speed cabling is a pre-requisite for today's performance demanding Ethernet and gigabit networks. ABCcables.com will keep you at the head of the pack with our high performance 550Mhz Cat6 patch cables. Our Cat6 550Mhz patch cables easily handle bandwidth intensive applications and more. With the UL certified patch cables that meet all the TIA/EIA standards. ABCcables' shielded Cat6 patch cables are well constructed using shielded Cat6 bulk cable, which consists of 4 shielded twisted pairs, 26 AWG. stranded conductors, and a PVC jacket. We terminate the snagless molded booted Cat6 shielded cables with Cat6 certified RJ45 shielded plugs, which are plated with 50 microns of gold plating per contact. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. Our molded, snagless boot prevents unwanted cable snags during installation/maintenance and provides extra strain-relief. About Category 6 (CAT 6): For 10/100Base-TX and 1000Base-TX (Gigabit Ethernet) Category 6 (ANSI/TIA/EIA-568-B.2-1) was ratified by the TIA/EIA in June 2002. CAT-6 provides higher performance than CAT-5e and features more stringent specifications for crosstalk and system noise. All CAT-6 components are backward compatible with CAT5e, CAT5, and Category 3. If different category components are used with higher category components, then the channel will be limited to the performance of the lower category. Using all Category 6 components throughout the signal path should result in a Power-Sum Attenuation-to-Crosstalk Ratio (PS-ACR) that is greater than or equal to zero at 200 MHz. Cat 6 Specifications: Frequency250 MHz. Attenuation (Min. at 100 MHz) 19.8 dB. Characteristic Impedance100 ohms @ 15%. NEXT (Min. at 100 MHz) 44.3 dB. PS-NEXT (Min. at 100 MHz) 42.3 dB. ELFEXT (Min. at 100 MHz) 27.8 dB. PS-ELFEXT (Min. at 100 MHz) 24.8 dB. Return Loss (Min. at 100 MHz) 20.1 dB. Delay Skew (Max. per 100 m) 45 ns. ABCcables.com Requirements: Conductor: 4-pair 26 AWG Stranded Copper Connector: 50-micron gold plated RJ-45 Male to Male Frequency: 550Mhz Molded, Snagless boot prevents unwanted cable snags Jacket: PVC Applications: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM Voice Designed For: Network Interface Cards, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and all other twisted-pair applications Wired: TSB 568B (Standard US) Meets or Exceeds Category 6 specifications Certifications: TIA/EIA; UL Listed
|
rj45 Connectors / Boots
